-
DB15-T 3588-2024 黄河灌区智慧农业物联网设备通信规约 内蒙古自治区.pdf
-
DB15-T 3587-2024 黄河水直滤滴灌玉米水肥一体化技术规程 内蒙古自治区.pdf
-
DB15-T 3586-2024 黄河灌区高标准农田盐碱地改良效果综合评价方法 内蒙古自治区.pdf
-
DB15-T 3585-2024 高标准农田施工质量评定规程 内蒙古自治区.pdf
-
DB15-T 3584-2024 黄河灌区农田排水种养循环利用技术规程 内蒙古自治区.pdf
-
DB15-T 3583-2024 黄河灌区轻中度盐碱耕地建设高标准农田技术规程 内蒙古自治区.pdf
-
DB15-T 3582-2024 黄河灌区玉米秸秆促腐还田培肥地力技术规程 内蒙古自治区.pdf
-
DB15-T 3581-2024 黄河灌区高标准农田多元快速培肥技术规程 内蒙古自治区.pdf
-
DB15-T 3580-2024 黄河灌区高标准农田防护林营造技术规程 内蒙古自治区.pdf
-
DB15-T 3579-2024 黄河灌区高标准农田犁底层机械化破除技术规程 内蒙古自治区.pdf
-
DB15-T 3578-2024 黄河灌区暗管明沟结合排水排盐技术规程 内蒙古自治区.pdf
-
DB15-T 3577-2024 黄河灌区盐碱地向日葵水肥一体化节水减肥技术规程 内蒙古自治区.pdf
-
DB15-T 3576-2024 黄河灌区向日葵生物降解地膜起垄种植技术规程 内蒙古自治区.pdf
-
DB15-T 3575-2024 黄河灌区湖泊滴灌用水补水技术规程 内蒙古自治区.pdf
-
DB15-T 3574-2024 黄河灌区黄河水喷滴灌水质处理技术规程 内蒙古自治区.pdf
-
DB15-T 3573-2024 全生命周期评价通则 阿拉善驼奶 内蒙古自治区.pdf
-
DB15-T 3572-2024 阿拉善双峰驼挤奶厅管理规范 内蒙古自治区.pdf
-
DB15-T 3571-2024 阿拉善双峰驼挤奶操作技术规程 内蒙古自治区.pdf
-
DB15-T 3570-2024 阿拉善双峰驼主要牧草营养成分评定和日粮配制 内蒙古自治区.pdf
-
DB15-T 3569-2024 阿拉善双峰驼乳房炎防治技术规程 内蒙古自治区.pdf
-
DB15-T 3568-2024 阿拉善双峰驼挤奶母驼调教管理规范 内蒙古自治区.pdf
-
DB15-T 3567-2024 阿拉善双峰驼驼羔饲养技术规范 内蒙古自治区.pdf
-
DB15-T 3566-2024 煤化工企业消防安全管理规范 内蒙古自治区.pdf
-
DB15-T 3565-2024 电动自行车消防安全管理规范 内蒙古自治区.pdf
-
DB15-T 3564-2024 山羊绒、绵羊毛及其混合物定量分析 扫描电镜细粒度图像识别法 内蒙古自治区.pdf
-
DB15-T 3563-2024 山羊绒、绵羊毛及其混合物定量分析 光学显微镜图像增强识别法 内蒙古自治区.pdf
-
DB15-T 3562-2024 规模化猪场生猪运输规范 内蒙古自治区.pdf
-
DB15-T 3561-2024 规模化猪场洗消技术规范 内蒙古自治区.pdf
-
DB15-T 3560-2024 规模化猪场环境样品非洲猪瘟监测技术规范 内蒙古自治区.pdf
-
DB15-T 3559-2024 规模化猪场商品猪养殖技术规范 内蒙古自治区.pdf
-
DB15-T 3558-2024 规模化猪场高产母猪养殖技术规范 内蒙古自治区.pdf
-
DB15-T 3557-2024 规模化猪场哺乳仔猪管理技术规范 内蒙古自治区.pdf
-
DB15-T 3556-2024 规模化猪场种猪繁育技术规范 内蒙古自治区.pdf
-
DB15-T 3555-2024 装配式蒙古包技术规程 内蒙古自治区.pdf
-
DB15-T 3554-2024 舍饲条件下巴美肉羊两年三产技术规程 内蒙古自治区.pdf
-
DB15-T 3553-2024 绵羊福利化公路运输规范 内蒙古自治区.pdf
-
DB15-T 3552-2024 绵羊母子一体化饲养管理技术规程 内蒙古自治区.pdf
-
DB15-T 3551-2024 呼伦贝尔羊种质资源冷冻保存技术规程 内蒙古自治区.pdf
-
DB15-T 3550-2024 细叶韭栽培技术规程 内蒙古自治区.pdf
-
DB15-T 3549-2024 益母草种植技术规程 内蒙古自治区.pdf
-
DB15-T 3548-2024 乳苣直播技术规程 内蒙古自治区.pdf
-
DB15-T 3547-2024 荞麦茎溃疡病绿色防控技术规程 内蒙古自治区.pdf
-
DB15-T 3546-2024 荞麦田禾本科杂草防除技术规程 内蒙古自治区.pdf
-
DB15-T 3545-2024 冷凉干旱地区油菜宽膜沟播栽培技术规程 内蒙古自治区.pdf
-
DB15-T 3544-2024 三膜单被大棚西瓜栽培技术规程 内蒙古自治区.pdf
-
DB15-T 3543-2024 大蒜主要病虫害绿色防控技术规程 内蒙古自治区.pdf
-
DB15-T 3542-2024 杨十斑吉丁虫检疫技术规程 内蒙古自治区.pdf
-
DB15-T 3541-2024 光肩星天牛检疫技术规程 内蒙古自治区.pdf
-
DB15-T 3540-2024 青杨天牛检疫技术规程 内蒙古自治区.pdf
-
DB15-T 3539-2024 白杨透翅蛾检疫技术规程 内蒙古自治区.pdf
-
DB3505-T 16—2024 非物质文化遗产 蟳埔女习俗 簪花围技艺 泉州市.pdf
-
DB32-T 4822—2024 PID 回路性能评估与优化实施技术规范 江苏省.pdf
-
DB32-T 4821—2024 岩沥青复配改性添加剂路面施工技术规范 江苏省.pdf
-
DB32-T 4820—2024 桥梁冲刷动力识别与快速筛查技术规范 江苏省.pdf
-
DB32-T 4819—2024 安全教育体验馆建设指南 江苏省.pdf
-
DB32-T 4818.3—2024 党史资料数据规范 第3部分:数据标引 江苏省.pdf
-
DB32-T 4818.2—2024 党史资料数据规范 第2部分:数据采集 江苏省.pdf
-
DB32-T 4818.1—2024 党史资料数据规范 第1部分:数据编目 江苏省.pdf
-
DB32-T 4817—2024 太湖流域农村生活污水处理技术规范 江苏省.pdf
-
DB32-T 4816—2024 湖库蓝藻水华及湖泛短期预测预警技术规范 江苏省.pdf
-
DB32-T 4815—2024 淡水大型底栖无脊椎动物监测技术规范 江苏省.pdf
-
DB32-T 4814—2024 智能插秧机 质量评价技术规范 江苏省.pdf
-
DB32-T 4813—2024 水产养殖场投入品管理规范 江苏省.pdf
-
DB32-T 4812—2024 湿地修复区生物多样性保育技术导则 江苏省.pdf
-
DB32-T 4811—2024 梨轻简化栽培技术规程 江苏省.pdf
-
DB32-T 4810—2024 江南地区观赏牡丹种植技术规程 江苏省.pdf
-
DB32-T 4796-2024 装配化装修施工质量验收规程 江苏省.pdf
-
DB32-T 4795-2024 预制装配式混凝土综合管廊技术规程 江苏省.pdf
-
DB32-T 4794-2024 预制预应力混凝土装配整体式结构技术规程 江苏省.pdf
-
DB32-T 4793-2024 球墨铸铁管排水系统应用技术规程 江苏省.pdf
-
DB32-T 4792-2024 民用建筑信息模型施工应用标准 江苏省.pdf
-
DB32-T 4791-2024 绿色建筑工程施工质量验收标准 江苏省.pdf
-
DB32-T 4790-2024 建筑施工特种作业人员安全操作技能考核标准 江苏省.pdf
-
DB32-T 4789-2024 固化粉煤灰应用技术规程 江苏省.pdf
-
DB32-T 4788-2024 城镇污水处理厂尾水湿地运行与维护技术规程 江苏省.pdf
-
DB32-T 4787-2024 城镇户外广告和店招标牌设施设置技术标准 江苏省.pdf
-
DB32-T 4786-2024 城镇供水服务质量标准 江苏省.pdf
-
DB32-T 4785-2024 城市设计三维数字报建数据库标准 江苏省.pdf
-
DB32-T 4784-2024 城市基础设施安全运行智慧监管系统数据标准 江苏省.pdf
-
DB32-T 4783-2024 玻璃纤维增强复合材料筋基坑工程应用技术规程 江苏省.pdf
-
DB64-T 1149-2024 工业节能标准体系 宁夏回族自治区.pdf
-
DB64-T 2001-2024 实景三维数据成果规范 宁夏回族自治区.pdf
-
DB64-T 2000-2024 自然资源调查监测技术规程 宁夏回族自治区.pdf
-
DB64-T 1999.2-2024 国土空间生态修复工程建设标准 第2部分:矿山生态修复 宁夏回族自治区.pdf
-
DB64-T 1999.1-2024 国土空间生态修复工程建设标准 第1部分:国土整治 宁夏回族自治区.pdf
-
DB64-T 1998-2024 公交碳减排计量方法技术标准 宁夏回族自治区.pdf
-
DB64-T 1997-2024 残疾儿童服务机构无障碍设施建设规范 宁夏回族自治区.pdf
-
DB3411-T 0040-2024 特困人员供养服务机构管理规范 滁州市.pdf
-
DB3411-T 0039-2024 废包装桶回收再利用技术规范 滁州市.pdf
-
DB1509-T 0028-2024 西门塔尔牛(乳用)饲养管理技术规程 乌兰察布市.pdf
-
DB1509-T 0027-2024 肉用繁殖母牛饲养管理技术规程 乌兰察布市.pdf
-
DB1509-T 0026-2024 肉牛育肥技术规程 乌兰察布市.pdf
-
DB1509T 0025-2024 肉牛舍设计与建筑技术规范 乌兰察布市.pdf
-
DB5206-T 176-2024 数据中心建设和使用管理规范 铜仁市.pdf
-
DB5206-T 175-2024 公共数据全生命周期安全管理规范 铜仁市.pdf
-
DB5206-T 174-2024 云资源利用率计算及调整规范 铜仁市.pdf
-
EN ISO 6416-2017.pdf
-
GM T 0011-2023 可信计算 可信密码支撑平台功能与接口规范.pdf
-
IEC 62430 2019 Environmentally conscious design (ECD) — Principles, requirements and gui.pdf
-
IEC 62990-1 2019 Workplace Atmospheres — Part 1 Gas detectors — Performance requirements of detectors for toxic gases.pdf
-
IEC 80601-2-60 2019 Medical electrical equipment — Part 2-60 Particular requirements for the basic safety and essential performance of dental equipment.pdf
-
IEC 81346-2 2019 Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 2 Classification of objects and codes for classes.pdf
-
ISO IEC 19770-8 2020 Information technology — IT asset management — Part 8 Guidelines for mapping of industry practices to from the ISO IEC 19770 family of standards.pdf
-
ISO IEC TR 15944-14 2020 Information technology — Business operational view — Part 14 Open-edi reference model and cloud computing architecture.pdf
-
ISO 10018 2020 Quality management — Guidance for people engagement.pdf
-
ISO 10049 2019 Aluminium alloy castings — Visual method for assessing porosity.pdf
-
ISO 10070 2019 Metallic powders — Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions.pdf
-
ISO 10086-1 2019 Coal — Methods for evaluating flocculants for use in coal preparation — Part 1 Basic parameters.pdf
-
ISO 10100 2020 Hydraulic fluid power — Cylinders — Acceptance tests.pdf
-
ISO 10110-12 2019 Optics and photonics — Preparation of drawings for optical elements and systems — Part 12 Aspheric surfaces.pdf
-
ISO 10110-8 2019 Optics and photonics — Preparation of drawings for optical elements and systems — Part 8 Surface texture.pdf
-
ISO 10113 2020 Metallic materials — Sheet and strip — Determination of plastic strain ratio.pdf
-
ISO 10119 2020 Carbon fibre — Determination of density.pdf
-
ISO 1013 2020 Coke — Determination of bulk density in a large container.pdf
-
ISO 10143 2019 Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules.pdf
-
ISO 10252 2020 Bases for design of structures — Accidental actions.pdf
-
ISO 10271 2020 Dentistry — Corrosion test methods for metallic materials.pdf
-
ISO 10276 2019 Nuclear energy — Fuel technology — Trunnion systems for packages used to transport radioactive material.pdf
-
ISO 10312 2019 Ambient air — Determination of asbestos fibres — Direct transfer transmission electron microscopy method.pdf
-
ISO 10350-2 2020 Plastics — Acquisition and presentation of comparable single-point data —.pdf
-
ISO 10360-5 2020 Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 5 Coordinate measuring machines (CMMs) using single and multiple.pdf
-
ISO 10362-1 2019 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1 Gas-chromatographic method.pdf
-
ISO 10406-3 2019 Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 3 CFRP strips.pdf
-
ISO 10426-3 2019 Petroleum and natural gas industries — Cements and materials for well cementing — Part 3 Testing of deepwater well cement formulations.pdf
-
ISO 10499-1 2019 Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1 Designation, dimensions and marking.pdf
-
ISO 105-B06 2020 Textiles — Tests for colour fastness — Part B06 Colour fastness and ageing to artificial light at high temperatures Xenon arc fading lamp test.pdf
-
ISO 10551 2019 Ergonomics of the physical environment — Subjective judgement scales for assessing physical environments.pdf
-
ISO 10581 2019 Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications.pdf
-
ISO 10679 2019 Steels — Cast tool steels.pdf
-
ISO 10722 2019 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method).pdf
-
ISO 10726 2020 Portable chain-saws — Chain catcher — Dimensions and mechanical strength.pdf
-
ISO 10752 2019 Coal sizing equipment — Performance evaluation.pdf
-
ISO 10753 2019 Coal preparation plant — Assessment of the liability to breakdown in water of materials associated with coal seams.pdf
-
ISO 10763 2020 Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures.pdf
-
ISO 10791-7 2020 Test conditions for machining centres — Part 7 Accuracy of finished test pieces.pdf
-
ISO 10795 2019 Space systems — Programme management and quality — Vocabulary.pdf
-
ISO 10802 2020 Ductile iron pipelines — Hydrostatic testing after installation.pdf
-
ISO 10810 2019 Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis.pdf
-
ISO 10813-2 2019 Vibration-generating machines — Guidance for selection — Part 2 Equipment for dynamic structural testing.pdf
-
ISO 10863 2020 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD).pdf
-
ISO 1087 2019 Terminology work and terminology science — Vocabulary.pdf
-
ISO 10872 2020 Water and soil quality — Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda).pdf
-
ISO 10934 2020 Microscopes — Vocabulary for light microscopy.pdf
-
ISO 10961 2019 Gas cylinders — Cylinder bundles — Design, manufacture, testing and inspe.pdf
-
ISO 10968 2020 Earth-moving machinery — Operator's controls.pdf
-
ISO 10993-15 2019 Biological evaluation of medical devices — Part 15 Identification and quantification of degradation products from metals and alloys.pdf
-
ISO 10993-18 2020 Biological evaluation of medical devices — Part 18 Chemical characterizatio.pdf
-
ISO 10993-9 2019 Biological evaluation of medical devices — Part 9 Framework for identification and quantification of potential degradation products.pdf
-
ISO 11036 2020 Sensory analysis — Methodology — Texture profile.pdf
-
ISO 11105 2020 Small craft — Ventilation of petrol engine and or petrol tank compartments.pdf
-
ISO 11114-1 2020 Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1 Metallic materials.pdf
-
ISO 11117 2019 Gas cylinders — Valve protection caps and guards — Design, construction an.pdf
-
ISO 11197 2019 Medical supply units.pdf
-
ISO 11274 2019 Soil quality — Determination of the water-retention characteristic — Laboratory methods.pdf
-
ISO 11277 2020 Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation.pdf
-
ISO 11343 2019 Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions — Wedge impact method.pdf
-
ISO 11433 2020 Nickel alloys — Determination of titanium content — Diantipyrylmeth.pdf
-
ISO 11494 2019 Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element.pdf
-
ISO 11495 2019 Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element.pdf
-
ISO 11513 2019 Gas cylinders — Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) — Design, construction, testing, use and periodic inspection.pdf
-
ISO 11525-1 2020 Rough-terrain trucks — Safe use requirements — Part 1 Variable-reach truck.pdf
-
ISO 11525-2 2020 Rough-terrain trucks — Safe use requirements — Part 2 Slewing variable-reach trucks.pdf
-
ISO 11551 2019 Optics and photonics — Lasers and laser-related equipment — Test method for absorptance of optical laser components.pdf
-
ISO 11591 2020 Small craft — Field of vision from the steering position.pdf
-
ISO 11665-1 2019 Measurement of radioactivity in the environment — Air radon-222 — Part 1 Origins of radon and its short-lived decay products and assoc.pdf
-
ISO 11665-8 2019 Measurement of radioactivity in the environment — Air radon-222 — Part.pdf
-
ISO 11674 2019 Ships and marine technology — Heading control systems.pdf
-
ISO 11687-1 2020 Plain bearings — Pedestal plain bearings — Part 1 Pillow blocks.pdf
-
ISO 11687-2 2020 Plain bearings — Pedestal plain bearings — Part 2 Side flange bearings.pdf
-
ISO 11724 2019 Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash.pdf
-
ISO 11737-2 2019 Sterilization of health care products — Microbiological methods — Part 2 Tests of sterility performed in the definition, validation and maintenance of a sterilization process.pdf
-
ISO 11746 2020 Rice — Determination of biometric characteristics of kernels.pdf
-
ISO 11783-5 2019 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5 Network management.pdf
-
ISO 11812 2020 Small craft — Watertight or quick-draining recesses and cockpits.pdf
-
ISO 1182 2020 Reaction to fire tests for products — Non-combustibility test.pdf
-
ISO 11833-1 2019 Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1 Types, dimensions and characteristics for sheets of thickness not less than 1 mm.pdf
-
ISO 11844-1 2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1 Determination and estimation of indoor corrosivity.pdf
-
ISO 11844-2 2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2 Determination of corrosion attack in indoor atmospheres.pdf
-
ISO 11844-3 2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3 Measurement of environmental parameters affecting indoor corrosivity.pdf
-
ISO 11845 2020 Corrosion of metals and alloys — General principles for corrosion testing.pdf
-
ISO 11855-7 2019 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7 Input parameters for the energy calculation.pdf
-
ISO 11890-2 2020 Paints and varnishes — Determination of volatile organic compounds(VOC) and or semi volatile organic compounds (SVOC) content — Part 2 Gas-chromatographic method.pdf
-
ISO 11907-1 2019 Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1 General concepts and applicability.pdf
-
ISO 11963 2019 Plastics — Polycarbonate sheets — Types, dimensions and characteristics.pdf
-
ISO 11971 2020 Steel and iron castings — Visual testing of surface quality.pdf
-
ISO 1198 1972 Sealed-beam landing lamps for aircraft — Dimensions.pdf
-
ISO 12004-1 2020 Metallic materials — Determination of forming-limit curves for sheet and strip — Part 1 Measurement and application of forming-limit diagrams in the press shop.pdf
-
ISO 12039 2019 Stationary source emissions — Determination of the mass concentra.pdf
-
ISO 12098 2020 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 15-pole connector for vehicles with 24 V nominal supply voltage.pdf
-
ISO 12165 2019 Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols.pdf
-
ISO 12168-2 2019 Plain bearings — Hydrostatic plain journal bearings without drainage.pdf
-
ISO 12215-10 2020 Small craft — Hull construction and scantlings — Part 10 Rig loads and rig attachment in sailing craft.pdf
-
ISO 12215-7 2020 Small craft — Hull construction and scantlings — Part 7 Determination of loads for multihulls and of their local scantlings using ISO 12215-5.pdf
-
ISO 12353-1 2020 Road vehicles — Traffic accident analysis — Part 1 Vocabulary.pdf
-
ISO 12381 2019 Health informatics — Explicit time-related expressions for healthcare-specific.pdf
-
ISO 125 2020 Natural rubber latex concentrate — Determination of alkalinity.pdf
-
ISO 12620-1-2022 Management of terminology.pdf
-
ISO 12620-2009 Terminology and other language and.pdf
-
ISO 12620-2019.pdf
-
ISO 12641-2 2019 Graphic technology — Prepress digital data exchange — Part 2 Advanced colour targets for input scanner calibration.pdf
站内资源均来自网友分享或网络收集整理,若无意中侵犯到您的权利,敬请联系我们
微信(点击查看客服),我们将及时删除相关资源。