ISO INTERNATIONAL STANDARD 8510-2 Second edition 2006-12-01 Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180° peel Adhésifs - Essai de pelage pour un assemblage collé flexible-sur-rigide Partie 2: Pelage a 180° Reference number ISO 8510-2:2006(E) @ISO2006 ISO 8510-2:2006(E) Contents Page Foreword 1 Scope 2 Normative references 3 Principle... 4 Apparatus 5 Test specimens.. 6 Conditioning and testing atmosphere. 7 Procedure .... 8 Expression of results . 9 Precision.. 10 Test report Bibliography... Is 2006-All rights reserved ii ISO 8510-2:2006(E) Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing International Standards is normally carried out through IsO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with isO, also take part in the work. IsO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. ISO 8510-2 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products This second edition cancels and replaces the first edition (sO 8510-2:1990), Clause 2 and Figure 1 of which have been revised. In addition, minor editorial changes have been made in the text. IsO 8510 consists of the following parts, under the general title Adhesives - Peel test for a flexible-bonded- to-rigid test specimenassembly: Part 1:90°peel Part 2: 180°peel @ ISO 2006 - All rights reserved INTERNATIONAL STANDARD ISO 8510-2:2006(E) Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180° peel SAFETY PRECAUTIONS - Persons using this document should be familiar with normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any. associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. 1 Scope This part of IsO 8510 specifies a 180° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends where one adherend is flexible and the other is rigid. peel test, is described in IsO 8510-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated Iso 291, Plastics - Standard atmospheres for conditioning and testing IsO 17212, Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding 3 Principle A bonded assembly of two adherends is prepared using the adhesive under test. The adherends are then the plane of the bond, through the separated part of the flexible adherend. 4 Apparatus 4.1 Tensile testing machine, capable of supplying a tensile force with a constant rate of grip separation. The indicated force shall not differ from the true applied force by more than 2 %. The response time of the full-scale reading. @ ISO 2006 - All rights reserved 1 ISO 8510-2:2006(E) 4.2 Grips, one of which shall be suitable for firmly clamping the rigid adherend (5.1.2) so