BS ISO BRITISH STANDARD 6415:2005 Internal combustion engines Spin-on filters for lubricating oil Dimensions ICS 43.060.30 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTL ABritish Standards BS ISO 6415:2005 National foreword This British Standard reproduces verbatim ISO 6415:2005 and implements it as the UK national standard. It supersedes BS 7403-13:1991 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee MCE/21, Filters for gases and liquids, to Subcommittee MCE/21/5, Filters for lubricating oil, which has the responsibility to: aidenquirerstounderstandthetext; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to inthisdocumentmaybefoundintheBSICatalogueunderthesectionentitled "International Standards Correspondence Index", or by using the“Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and ii, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the documentwaslastissued. Amendments issued since publication This British Standard was published under the authority Amd. No. Date Comments of the Standards Policy and StrategyCommittee on5December2005 C BSI 5 December 2005 ISBN 0 580 46282 X BS IS0 6415:2005 INTERNATIONAL ISO STANDARD 6415 Third edition 2005-06-01 Internal combustion engines Spin-on filters for lubricating oil Dimensions Moteursa combustion interne-Filtresahuilevissés-Dimensions Reference number ISO 6415:2005(E) ii BS IS0 6415:2005 Foreword sO (the International Organization for Standardization) is a worldwide federation of national standards bodies technical committees. Each member body interested in a subject for which a technical committee has been International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. isO shall not be held responsible for identifying any or all such patent rights. ISO 6415 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 7, Injection equipment and filters foruse on road vehicles. This third edition cancels and replaces the second edition (IsO 6415:1990), which has been technically revised. ii blank BS ISO 6415:2005 Internal combustion engines Spin-on filters for lubricating oilDimensions 1 Scope This International Standard specifies the essential dimensionsnecessaryforinterchangeability of spin-on filters of the full-flow type for the filtration of lubricating oil for internal combustion engines. It also gives the designation and marking of these filters. 2Normative references The following referenced documents are indispensable for the application of this document. For dated IsO 68 (all parts), ISO general purpose screw threads Basic pr