BS ISO BRITISH STANDARD 6117:2005 Road vehicles Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 C max.) ICS 43.040.40; 83.140.50 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTL BS ISO 6117:2005 National foreword This British Standard reproduces verbatim ISO 6117:2005 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee PRI/69, Components and fluids for vehicle braking systems, which has the responsibilityto: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index", or by using the “"Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and ii, a blank page, pages 1 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication This BritishStandard was published under the authority Amd. No. Date Comments of the Standards Policy and Strategy Committee on18November2005 BSI18November2005 ISBN 0 580 46517 9 BS ISO 6117:2005 INTERNATIONAL ISO STANDARD 6117 Second edition 2005-06-15 Road vehicles Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.) Véhiculesroutiers- Capuchonsencaoutchoucpourcylindresderoue pour freins hydrauliques a tambour utilisant un liquide de frein a base non pétroliere (température maximale d'utilisation 10o C) Reference number ISO 6117:2005(E) ii BS IS0 6117:2005 Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies non-governmental, in liaison with isO, also take part in the work. isO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent systems and equipment. Thissecondeditioncancelsandreplacesthefirstedition(lSO6117:198o),whichhasbeentechnicallyrevised blank BS ISO 6117:2005 Road vehicles Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.) 1 Scope This International Standard specifies performance tests for moulded rubber boots used at end closures on could cause corrosion and otherwise impair wheel brake operation It is applicable to boots of both plain and reinforcement insert types, for fitting in wheel cylinders using a fluid strength or elongation at brake of the rubber compound; it does not cover the strength of adhesion of rubber to the reinforcement in the insert type. 2Normative references The following refe