BS EN ISO BRITISH STANDARD 3815-1:2005 Zinc and zinc alloys - Part l: Analysis of solid samples by optical emission spectrometry The European Standard EN IS0 3815-1:2005 has the status of a British Standard ICS 77.120.60 BSi British Standards BS EN ISO 3815-1:2005 National foreword This British Standard is the official English language version of EN ISO 3815-1:2005. It is identical with ISO 3815-1:2005. BS EN ISO 3815-1:2005 together with BS EN ISO 3815-2:2005 supersedes BS EN 12019:1998 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee NFE/8, Zinc, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index", or by using the “Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages i and ii, a blank page, pages 1 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication This British Standard was published undertheauthority Amd. No. Date Comments of the Standards Policy and Strategy Committee on10August2005 @ BSI 10 August 2005 ISBN 0 580 46225 0 EUROPEANSTANDARD EN ISO 3815-1 NORME EUROPEENNE EUROPAISCHE NORM May 2005 ICS 77.120.60 Supersedes EN 12019:1997 English version Zinc and zinc alloys - Part 1 : Analysis of solid samples by optical emission spectrometry (lSO 3815-1:2005) Zinc et alliages de zinc - Partie 1: Analyse d'échantllons Zink und Zinklegierungen - Teil 1: Optische massifs par spectrometrie d'emission optique (ISO 3815- EmissionsspektrometrieanfestenProben (ISO3815- 1:2005) 1:2005) This European Standard was approved by CEN on 12 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France. Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. cer EUROPEAN COMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUR OPAIS CHESKOM ITEEFURNORMUNG ManagementCentre:ruedeStassart,36B-1050Brussels 2005CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3815-1:2005: E worldwidefor CEN national Members. EN IS0 3815-1:2005 Foreword "Zinc and zinc alloys" in collaboration with Technical Committee CEN/TC 209 "Zinc and zinc alloys", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either