BS ISO BRITISH STANDARD 2467:2004 Cinematography Image area produced by 65 mm/5 perforation motion-picture camera aperture andmaximum projectable image area on 70 mm/5 perforation motion-picture prints Positions and dimensions ICS 37.060.20 BSi British Standards BS ISO 2467:2004 National foreword This British Standard reproduces verbatim IS0 2467:2004 and implements it as the UK national standard. It supersedes BS 5550-4-2.1:1980 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee CPW/36, Cinematography, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index", or by using the “Search' facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page pages ii and ii, a blank page, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the documentwaslastissued. Amendments issued since publication This British Standard was published under the authority Amd. No. Date Comments of the Standards Policy and Strategy Committee on 13July2004 BSI13July2004 ISBN 0 580 44047 8 BS. ISO. 2467:2004 INTERNATIONAL ISO STANDARD 2467 Third edition 2004-06-15 Cinematography Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints - Positions and dimensions Cinématographie- Champd'image enregistrepar lafenetredes caméras 65 mm/5 perforations et champ maximal d'image projetable sur copies d'exploitation 70 mm/5 perforations Positions et dimensions Reference number ISO 2467:2004(E) BS ISO 2467:2004 ii BS.ISO.2467:2004 Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing International Standards is normally carried out through ISO established has the right to be represented on that committee. International organizations, governmental and Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/lECDirectives,Part2 adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent ISO 2467 was prepared by Technical Committee ISO/TC 36, Cinematography. revision. ii blank BS ISO. 2467:2004 Cinematography lmage area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints - Positions and dimensions 1 Scope This International Standard specifies, for 65 mm/5 perforation motion-picture cameras and projectors, the well as the image positions relative to the reference edge of the film, and the perforations used to position the film in the camera. 2 Normative references The following referenced documents are indispensable for the application of this doc