ISO INTERNATIONAL STANDARD 14711 First edition 2003-03-01 Space systems Unmanned mission operations concepts Guidelines for defining and assessing concept products Systemes spatiaux - Concept d'opérations de mission non habitée Lignes directrices pour la definition et I'évaluation des produits du concept Reference number ISO 14711:2003(E) ISO @ ISO 2003 T by IHS under lic Not for Resale ISO 14711:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IsO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below ISO2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, IsO's member body in the country of the requester. ISO copyright office Case postale 56 . CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland @ ISo 2003 - All rights reserved py IHS unde ermittedwithoutlicense from IHS Not for Resale ISO 14711:2003(E) Contents Page Foreword. .iv Introduction 1 Scope 2 Terms and definitions... 3 Requirements for the operations concept. 3.1 General.. 3.2 Mission operations concept guidance. 3.3 Guideline descriptions ......... Bibliography .... 11 Copyright IntemationalOganzanadardizaightsreseved ili ded by IHS under ise with IS ed without license from IHS Not for Resale ISO 14711:2003(E) Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (IsO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2 adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. ISO 14711 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 14, Space systems and operations. @ISO2003-Allrightsreserved onal Organization for Standardizatior ISO 14711:2003(E) Introduction This International Standard defines the steps required to develop a comprehensive space system mission flight element development efforts, balancing performance, cost, and risk issues. This International Standard is also applicable to the mission operations support to the pre-launch and launch phases of the mission using the mission operations systems. Standard products enable industry to develop commercial off-the-shelf tools for developing a space systems mission operations concept.This International Standardisspecificallytailoredforunmanned spacemissions and may be of partial use for human flight mission operations concepts. Users of this International Standard include project managers, operations personnel, flight element engineers, and operations facility personnel whoareresponsiblefordevelopingandintegratingthemissionoperationssystem.ThisInternationalStandard International Standard is applicable for the