ICS 27.010 F 13 NB Record Number: 64307-2018 Energy Sector Standard of the People's Republic of China NB/T34064-2018 Specification for Operation Management of Densified Biofuel Projects forHeatingBoilers Issue date: 2018-04-03 Implementation date: 2018-07-01 Issued byNationalEnergyAdministration NB/T 34064-2018 Foreword This standard is drafted in accordance with the rules given in GB/T 1.1-2009 Directives for Standardization-Part I: Structure and drafting of standards. This standard is managed by the National Energy Administration and proposed by the China Renewable Energy Engineering Institute, which is responsible for daily management. The China Renewable Energy Engineering Institute is responsible for the explanation of specific technical content. If you have comments and suggestions during the implementation of this standard, please send them to the China Renewable Energy Engineering Institute (Address: No. 2, Liupukang North Street, Xicheng District, Beijing, 100120). This standard is drafted by the Academy of Agricultural Planning and Engineering, and Beijing Yifang Sunshine Energy Technology Co., Ltd. The main drafters of this standard are YAO Zonglu, ZHAO Lixin, MENG Haibo, HUO Lili, CONG Hongbin, YUAN Yanwen, ZHAO Kai, FENG Jing, LUO Juan, REN Yawei, LI Lijie, WANG Guan, DONG Yifang. III NB/T34064-2018 Specification for Operation Management of Densified Biofuel Projects for Heating Boilers Scope This standard specifies the methods and requirements of the operation, maintenance, and safe operation of densified biofuel projects for heating boilers. This standard is applicable to densified biofuel projects for heating boilers with an annual production capacity of 10,000 tons ormore (≥ 10,000 tons) Normative references 2 The following documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest version of the referenced document (including all amendments) applies. GB 4387 Safety regulation for railway and road transportation in plants of industrial enterprises GB/T 12801 General principles for the requirements of safety and health in production process GB 15577 Safety regulations for dust explosion prevention and protection GB/T15605Guideforpressureventingofdust explosions GB 50601 Code for construction and quality acceptance for lightning protection engineering of structures JB/T 10354 Operating code for industrial boilers NY/T1882Technical conditionsfordensifiedbiofuelmoldingequipment NY/T 1883 Testing method for densified biofuel molding equipment NY/T 1915 Densified biofuel-Terminology and definitions 3 General rule 3.1Operationmanagement 3.1.1 The operating process code shall be formulated, the requirements for raw materials shall be specified. the main process technical indicators shall be proposed, and the process procedure and equipment details shall be attached. 3.1.2 The operation and management manual shall be established, which specifies the working responsibilities of post personnel, post operation code, equipment operation code and maintenance code. 3.1.3 A production handover shift system shall be established, specifying the content and responsibility limits of handover shift inspection. 3.1.4 The operation management personnel shall be familiar with the operation requirements of the process and equipment facilities, operation technology, performance indicators and countermeasures for abnormal situations. 3.1.5 The operator shall be familiar with the operation requirements, operation technology and performance indicators of the facilities and equipment in this position, and be familiar with the process procedure, and observe the post operation code. 3.1.6 Operators and maintenance personnel shall go through professional technical training. 3.1.7 The equipment operator shall fill in the operation record accurately on time. The operation management personnel shall regularly inspect and verify the original record. 3.