BS EN 60695-10-3:2016 BSl Standards Publication 28/0 Fire hazard testing Part 10-3: Abnormal heat - Mould stress relief distortion test bsi. BRITISH STANDARD BS EN 60695-10-3:2016 National foreword This British Standard is the UK implementation of EN 60695-10-3:2016. It is identical to IEC 60695-10-3:2016. It supersedes BS EN 60695-10-3:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee GEL/89, Fire hazard testing. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @ The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN9780580838705 ICS 13.220.40; 29.020 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016 Amendments/corrigenda issued since publication Date Text affected BS EN60695-10-3:2016 EN 60695-10-3 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHENORM November 2016 ICS 29.020 Supersedes EN 60695-10-3:2002 English Version Version correct as of 28/02/2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test (IEC60695-10-3:2016) Essais relatifs aux risques du feu - Partie 10-3 : Chaleur Prufungen zur Beurteilung der Brandgefahr - Teil 10-3: anormale - Essai de deformation par reduction des Unubliche Warme - Prufung auf Verformung durch Abbau contraintes de moulage vonFormspannungen (IEC60695-10-3:2016) (IEC 60695-10-3:2016) This European Standard was approved by CENELEC on 2016-10-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. , The University of Bath, This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comite Europeen de Normalisation Electrotechnique Europaisches Komitee fur Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels @ 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref.No.EN 60695-10-3:2016 E